Network Racks


از {{model.count}}

Product code : TRB-1042

The rack is one of the main components of the Hot and Cold Aisle  Containment used to install active and passive equipment. TIAM Network  Co. uses the racks that manufactured at its factory for the iDC Hot and  Cold Aisle Containment and to complete this solution. As a result, the  selection of rack in this section is based on employers taste and  choise. Ultimately, based on the requirements and the needs, the  employer chooses one of the racks manufactured by the TIAM Network  company from the subset of the Server rack.

The product is not available.
  • {{value}}
Return the Products

Return the Products

We take back the sold product
Thank for your trust

Thank for your trust

The Warranty of UNICOM is 24 months

محصولات مرتبط

Proper use of space, proper access, security

  • 16U/ 20U/ 27U with 60cm width and 60cm depth
  • 35U with 60cm width and 80cm depth
  • 27U with 60cm width and 100cm depth
  • 42U with 60cm width and 100cm depth in two simple models and Perforated
  • Cable guide on the rail
  • With a space in the rack to place the 19-inch PDU (Zero Unit), without the need to occupy the convenient space rack


Cable guidance and management

  • Side panels with two horizontal leaf (at 42U racks), to increase the  useful space and enhance access to the equipment from the sides of the  rack
  • Front and rear door single-section, equipped with swing switching lock (Rittal design), with replaceable perforated door
  • Folding rails, to create the conductive area of the cable inside the  rails and have oval punches on the rails, to enter and exit the cable  (in models with a rails U)
  • Increase the width of the vertical rails ,and have the T punches on  them and on the reinforcement arms for the installation of the belt  retainer base, to ease and order more, in conducting cables, at a height  and depth of the rack (in models with U rail)
  • The design of the floor drawer tray, to cross the patch panel with the  cables connected to it, during the displacement of the equipment or  changing the rack
  • Possibility to fix the rack to the ground without opening the tray (at 42U racks)
  • Includes cable entries in the floor and ceiling racks with different  dimensions, to enter and exit the cable with different volumes and from  different locations


Ease of installation of equipment, Strength, Stability

  • Insert the white unit counter on the 4 vertical rails, for ease of installation of the equipment
  • Convenience and consistency in installing all standard network  equipment and common servers (in racks with a depth of 100 centimeters)
  • Thick (2mm) iron Rails for greater strength (in racks with a height greater than 27 U)
  • Changing the bolt connection to the welded connection (to the front  and rear columns) in the reinforcement arms, to increase the Stability  and bearing more weight
  • Reduce rack weight to ease of displacement by changing technology and  manufacturing engineering, along with increasing the quality and  strength of parts
  • Ability to adjust the distance between the rails, in depth of the  rack, in accordance with the depth of the equipment, without the need  for a specific tool (Tool Less) and using the manual tightening  mechanism instead of the bolt and nut connections.
  • The use of double sheet and change in pivoting chassis and rails, for greater strength


Variation in design and Consistency with interior decoration

  • Attractive front door design with metal and glass frame, to increase the strength and beauty
  • Black color, for more beauty and more harmony with the office environment


One of the distinguishing features of the Base Rack compared to other racks

  • Variety of production in different dimensions
  • Suitable for use as a network or server rack (Depending on the depth of the rack)


Write your comment

  • {{value}}
This comment will be sent as Reply to another comment. to decline click on cancel button.
Write your comment.
Wait a minutes...